Not working in Note 3



  • After a ~year wait I (finally) got my ring(s) today and I can't get those ring(s) to work with my Note 3.
    /* Little bit too big, but I can live with that */

    Regular tag(s) and those spare tag(s) works with Note 3 but not the ring. Don't ask what type of ring(s) I have, I really don't remember as it's been so long since I backed the project.

    I don't know what else to tell you than it's not working at all.

    ~Jape


  • Community Helper

    @Jape, how wide is the band... ~7mm or ~13mm? The thin band is the Classic size, the wide band is the Alpha size.
    I find that a lot of people get confused and try to use the ring the same way as a "standard" tag and you simply can't do that. It's a different proposition and you have to approach it differently, a little more slowly.
    Note 3 can be difficult with the Classic ring size though, and mileage varies. Sometimes an Alpha band will have more luck with these phones.



  • I don't have a ruler, but I'm guessing that those two rings are ~7mm and that one ring is ~13mm.

    I meant that Note 3 doesn't even recognise the NFC in those rings (when I said that regular tags and those spares works).

    Been testing hours and installing and re-installing app and still no go.


  • Community Helper

    Sorry @Jape, I didn't get a notification that you'd replied already - so you have both kinds of rings and neither works for you on your device?
    What if you try a different app like NXP Tagwriter (it's free) and use the 'View' function in that to attempt to read what's on the rings?
    Do they make the phone produce the failed attempt noise even? because if you can find the area where it makes that noise you can concentrate there.
    The rings tend to have to be actually touching the phone to be read and orientation and how you hold it and move it around the back of the phone can make a huge difference to the result you get.
    If you have an Alpha then I suggest using that one to start, it's an easier read on most devices and may work better for you as you're learning how to use the rings.



  • No worries @Lokki . Thanks for that suggestion. Tried it and none of my rings get recognized by the phone. Not even that -beep- sound, nothing. I've been "scratching" the bottom of my phone (meaning pressing that close to back cover) and tried to use in any possible orientation (while wearing the ring) and off-hand.



  • My life ends today and work row starts. I don't have (literally) time for a living when I'm working :/

    I open computer next time in 7 or 8 days when I have next off duty, so don't wonder if I don't reply.


  • Community Helper

    @Jape, delayed replies are ok - if you happen to get a chance to test the rings on any other android phones at some point that would be useful, to find out if they work on other phones. I suspect you may have an issue with yours that's causing them to misbehave.



  • Thanks :) Yes, I have tested on note 2 (it's my work phone and I don't care about it) and rings work in it. I backed project only thinking about my private phone (Note 3). I've done some re-flashing etc in my Note 3 while I was "absent" in the forums and I'm still owning non-functioning rings... (those do work on Note 2, but I don't care about that phone, it's only for work).


  • Community Helper

    The thing is there though, that the rings aren't non-functioning - it's your phone that's not working correctly.

    I'm only pointing this out because if you send back the rings you have and exchange them, the exchanged rings wont work any better on your phone (though they'll work fine on the Note 2 I'd bet). This would be a bit of a waste of time, especially if you've already got a Classic band and an Alpha band and neither are working with the Note 3.

    Note 3 has an extremely fiddly sweet spot, there are pictures of where it's located in the sweet spot thread on the forums. It's been reported that just like other Samsung devices you have to be dead-on with your ring orientation and sweet spot. If your case is thicker than a standard case, or if you have a non standard battery then your difficulties can also become worse.

    @MikeInSeattle posted a great photo of a clear backed case which shows exactly where his sweet spots lie.



  • Ugh, my job is killing me.... That's what I was afraid of... I try with assistance of that picture (thank you for that) but if it's not working, I give up on this.



  • Nope, not working in Note 3. I give up on this. Thank you for your time anyways @Lokki :)


  • Community Helper

    Ah, damn. I'm sorry we couldn't help you out a little more mate. Perhaps your next phone will be a little more likely to play nice...

    There is always the chance that it will come good with a replacement battery or that something is "off" about your firmware and/or settings. I accidentally killed NFC for a while with my Xperia M by uninstalling an NFC related framework without changing it's settings back to normal first. That had me scratching my head for a while.



  • Oh, that's a good point @Lokki I did some fiddling while rooting and testing&installing different ROMs. I should have enough time 1st of September. I format/re-flash my phone then.


  • Community Helper

    Ah, cool. Fingers crossed then!


Log in to reply
 

Looks like your connection to NFC Ring Forum was lost, please wait while we try to reconnect.