Mifare EV1



  • If I can convince my school to do it, would it be possible for them to write the same data on my student ID to my ring? The student ID is a Mifare EV1 card. I understand that this is probably not possible, it would just be so cool to be able to open my room at school with it.


  • Community Helper

    Hi @Fsmv - the Mifare EV1 appears to have a greater amount of storage space than the NTAG203 has, so it depends what information is being stored on the cards and whether the school system will read your NFC Ring or not - some readers have difficulty reading NTAG and/or the rings. My suggestion would be to ask them if they can try it - if it doesn't work then let us know, it will be interesting.
    There is the possibility that future versions of the ring will have more available storage space.



  • The card has 32 bytes of plain text which contains some header information and my student ID then there's 48 bytes of encrypted data for a total of 80 bytes. It appears I can write 144 bytes to the ring.
    I've found out that the card uses the ISO 14443-4 specification which the ring does not support, even though it has enough storage space. The secured area requires a hardware DES chip so that's completely out of the question. Getting the reader at school to even read the plain text (in any case it probably also needs the encrypted data) is probably not going to happen even, although if I can find a spec for the data format I'll try it. The reader probably won't read any other type of chip anyway and its not possible to change the chip it reads as.

    I learned quite a bit about the chip in the ring while researching this at least.


  • Community Helper

    Ah, that slipped straight past me, the encryption. A later iteration of the ring perhaps. :-)


  • Banned

    This post is deleted!

Log in to reply
 

Looks like your connection to NFC Ring Forum was lost, please wait while we try to reconnect.