[WIP] NFC car starter by MrStein
-
Hi,
there are 13.56MHz implants also
-
Yes, they're available. Personally I don't think the technology is advanced far enough to warrant having a permanent implant.
-
Well, I think nfc implant tag are only suitable for the animals identification..Not for the human.. But it's my opinion..
For the price, I have the same tag but in 125khz, I paid less than 1$ for one. I think this one is really expensive.
-
@MrStein sorry for the very late reply. I would completely love a blank but being from the United states it wouldn't be very beneficial to send one. I would still love to buy one from the nfc store since they do have that in the US now. Maybe putting to together a kit for a build your own would be a good idea. With the added door unlock part that another person had mentioned. Just a thought.
This could be easier to make instructions for assembling for that then translating a complete build from scratch.
Would wiring into an old turn key be easier then a button start?
-
Any News on this Topic? Is There a buyable Kit or at least a pcb available?
-
Here are the files :
http://www.partage-facile.com/0U65BW0G8V/atmega__v4.brd.htmlDon't forget it's not a plug an play solution and you will need to make some operation for finish your NFC starter ;)
-
@MrStein I was wondering if the keyduimo can be powered off an "always powered" line iin my car and be low powered enough to not drain the battery?
-
Hey Logan,
It's a good question, I currently make a tutorial for the doors opener and use a push button to start/stop the KeyDuino.
For the NFC starter, I use the temporary light (that allow 30s of supply to scan the ring/tag).I don't know how long you can use a battery if you use like 150mA, but I think it's a bad idea to "always powered" something in your car ;)
How, just for your information, if you have any question/ rem related to keyduino; please sen them on the keyduino forum, so me and my friend can answer to your question :)
http://keyduino.forumsactifs.com/ -
@MrStein Excuse me, but where is the schema version 4? Links do not work.
-
It works, you have to click on "téléchargement gratuit (vitesse NORMALE)" then wite the captcha and click on "télécharger ce fichier".
There are only the layout and not the schematics but I can upload both if you want. -
@MrStein Je reçus une lettre , je vous remercie! Bien que pas entièrement compris dans le projet. Comment fonctionne l'appareil vérifie que le moteur démarre ?
-
For now, the motor start with a defined time, there are no check if it's really launch or not.
If you want, you can connect a optocoupler on the pin n°3 of the header "EXT" and connect the optocoupler to the ODB2 pin 7 ;) -
@MrStein said in [WIP] NFC car starter by MrStein:
Here are the files of new optimised version, click on "téléchargement gratuit" :)
http://www.partage-facile.com/E8RQRYP85C/atmega_v3_nfc_starter.zip.html
A new 3d printed box will follow, in open source too :D
Hi MrStein, thanks for great idea and great work,
good job my friend,
I am very interested in smart car and trying with the help of micro-computers and network engineering for this,
but I do't have much experience in electronics,
How can I buy this Board? -
Hi Parviz, sadly I don't sell any prototype due to legal responsability, if you only need to unlock the car by NFC, you can follow this easy step by step tutorial: http://www.instructables.com/id/NFC-Car-Door-Control/
Bye,
Pierre
